Air Conditioner (AC) is an electronic device that consumes a lot of electricity, so it should not be used carelessly. As a solution, you can try ways to save AC power so that it is not wasted in this article.
As someone who lives in a tropical country, the temperature in Indonesia's dry season is much higher.
Therefore, the requirement to install air conditioning in the house is a natural thing.
Residents inside are definitely more willing to linger at home and breathe fresh air from the air conditioner than outside smoky.
The function of the AC itself is to cool the room, but that doesn't mean you can set it to the lowest temperature you want.
If you do this, the air conditioner will work harder, so power consumption will increase.
To avoid this problem, let's take a look at how to save AC power at home.
9 Ways to Save AC Electricity in Your Home and Avoid Waste
1. Choose an energy-efficient air conditioner
Air conditioners with energy-saving features are the main way to save electricity.
Low-power air conditioners have compressors that use less electricity than standard air conditioners.
In fact, energy-efficient air conditioners can save 20-30% of electricity consumption each month.
However, keep in mind that low power air conditioners are usually more expensive.
In addition, because the air conditioner uses very little electricity, the cooling process of the room takes longer.
2. Choose an air conditioner with low PK
Low Peak Air Conditioner Low Peak Air Conditioner
What is the minimum AC PK?
PK stands for the power required by one AC Paard Kracht.
Usually, AC power for 1 PK size has 350 watts to 700 watts of power.
The smaller the size of the PK AC you buy, the less power it consumes.
One way to use AC to save electricity tokens is to buy an AC with the lowest PK, namely PK.
This can be a solution for those who have rooms smaller than 10 square meters.
The following is a general guide in choosing a PK AC so that there is no waste:
- 1/2PK = 5000 Btu/hour (room size 10m2)
- 3/4PK = 7000 Btu/hour (room size 14m2)
- 1PK = 9000 Btu/hour (room size 18 square meters)
- 1 1/2PK = 12000 Btu/hour (room size 24m2)
- 2PK = 18000 Btu/hour (room size 36m2)
For example, suppose your home has a 500 watt air conditioner that is used on average for about 12 hours a day.
Meanwhile, the price of electricity is Rp. 1,352 per kWh.
So here's the calculation:
Total electricity: large watts x usage time x 30 days
So 500 watts x 12 hours per day x 30 days.
So you will spend 180,000 watts of electricity or 180 kWh in a month.
Then, multiply this calculation by the basic electricity tariff, which is Rp. 1,352.
Monthly electricity bill: 1 month total electricity x base rate
So, 180,000 watts x IDR 1,352 = IDR 243,360 per month.
This number is for one air conditioner only.
Imagine if there were two or more air conditioners in the house?
3. Avoid setting the temperature below 24 degrees
Plus, this trick can be an easy way to save electricity at home by avoiding setting temperatures below 24 degrees.
Setting the AC temperature below 24 degrees Celsius will only waste more electricity.
The way to save household AC electrical power is to set the AC temperature not lower than 24 degrees Celsius.
Use 24 degrees Celsius as the maximum temperature setting or your electricity bill will skyrocket.
4. Clean the air conditioner regularly
Want an easier way to save AC power in your home?
You must be diligent in cleaning your air conditioner regularly.
Why this happened?
A dirty air conditioner only makes the compressor work harder.
A compressor that works harder will use more electricity.
So clean the AC filter once a month and every 3 months.
5. Don't forget to set the AC timer
AC was created to provide coolness for those who are active indoors.
To save power even when using the air conditioner, don't forget to set the timer for the air conditioner every day.
Decide when you need air conditioning because no one is home.
This method can help you save AC power every day without you even knowing it.
6. Avoid opening air-conditioned closed rooms
open the door open the door
The way to save on air conditioning is to cover as much of the room as possible.
When the room door keeps opening and closing, the temperature in the room will become unstable because heat from outside will enter the room.
This condition will make the air conditioner work continuously to stabilize the temperature in the room.
If the air conditioner is installed in an open area, it will automatically be difficult for the room to reach the desired temperature, so the air conditioner continues to work optimally.
In open spaces, the area to be cooled is very large, possibly exceeding the cooling capacity of the air conditioner.
7. Do not turn on the air conditioner that has just been turned off
how to save power, how to save AC power
The last resort is if you just turned off the air conditioner, don't turn it on right away.
Often times, accidentally pressing the power off button on the air conditioner, and then continuing to turn it on, can cause problems with the air conditioner compressor.
Give the compressor oil and freon a few minutes to return it to the compressor.
By doing this, your AC compressor will last longer.
8. Clean the room regularly
neat clothes neat clothes
After cleaning the AC filter, don't forget to clean the air-conditioned room.
A dusty room affects the cleanliness of the AC filter, and voila!
As a result, the AC filter gets dirty faster and affects compressor performance.
Try cleaning cabinets and walls carefully.
9. Draw the curtains
Home Curtains Home Curtains
Closing the curtains helps it perform better and save on air conditioning, and voila.
Incoming sunlight can degrade the performance of the air conditioner, make it ineffective, and possibly damage the engine.
Therefore, when turning on the air conditioner, try to close the windows and curtains as tightly as possible.
Hopefully the above information is useful for you, yes!
Find other interesting tips only on the news portal jigiyaso.com
ViewTutupCommentNext Post Previous Post